Home Defense Frequently Asked Questions

The TrapBag® Water Filled Barrier is a temporary flood protection system designed to be filled with water to create a stable, continuous barrier. It is used for short term flood mitigation where rapid deployment and removal are required.

Once deployed, the barrier is filled with water using standard hoses or pumps. The weight of the water anchors the barrier in place while the flexible design allows it to conform to the ground surface.

The TrapBag® Water Filled Barrier is commonly used for

• Home openings
• Temporary flood response
• Roadway and access protection
• Facility and perimeter flood control
• Emergency response situations
• Short duration flood events

It is not intended for long term or permanent installations.

No additional equipment is required.

Installation requires:

• Waterproof Tape (not included)

The TrapBag® Water Filled Barrier performs best on relatively flat and smooth surfaces such as pavement. Excessive debris, sharp objects, or severe unevenness should be removed prior to installation to ensure proper sealing.

Barrier height varies by model. Typical water filled barriers provide protection in the range of approximately 16 inches depending on configuration and site conditions.

Yes. When properly handled and stored, the TrapBag® Water Filled Barrier is reusable for multiple deployments.

After the flood event, the barrier is drained of water and folded for removal. The lightweight design when empty allows for easy transport and storage.

Compared to sandbags, the TrapBag® Water Filled Barrier

• Deploys significantly faster
• Requires fewer personnel
• Eliminates the need for sand handling and disposal
• Provides a more consistent seal on suitable surfaces
• Reduces cleanup time after use

The barrier is constructed from durable materials intended for temporary outdoor use.

The barrier is intended for static or low velocity floodwaters. It is not recommended for use in fast moving water or high flow environments without additional anchoring and engineering review.

When empty and dry, the barrier can be rolled or folded and stored in a compact space. Storage in a cool, dry location is recommended.

Formal training is not required. However, basic installation guidance is recommended to ensure proper deployment and performance.